Somerset MA Gunite Pool Specialists
Gunite Pool Opening Service Somerset MA
When it comes to gunite pool opening service in Somerset MA, experience with concrete pools is everything. At Luxury Pools By MF, we provide expert gunite pool opening service designed specifically for the demands of concrete inground pools — protecting your plaster finish, your equipment, and your investment. We also provide professional pool closing service in Somerset MA and complete gunite pool winterization to protect your pool through New England winters.
The team has helped many Somerset homeowners, business owners, builders, property managers, and other individuals in the Greater Boston, MA area. After some research, we’re confident you’ll find us to be the right Gunite Pool Specialists to handle your outdoor project.
Luxury Pools By MF, a top-rated gunite pool builder specializes in:
-
-
- Custom Gunite Pool Design
- Custom Landscape Design
- Gunite Pool Installation
- Gunite Pool Renovation
- Pool Openings and Closings
- 3D Design Renderings
- Custom Spas
- Outdoor Kitchen / BBQ Installation
- Water Feature Design
- Unique Fire Pits
- Sunken Living Rooms
- Pool Houses and Outdoor Structures
- Amongst many other high-end services
-
Why It Matters
The Right Team Makes All the Difference When You Search for Pool Opening Service Near Me
Every spring, Somerset MA gunite pool owners face the same question: who should I call for pool opening service near me? And every fall: who can I trust to close my gunite pool correctly before winter? The answer matters far more than most homeowners realize. A gunite pool represents a six-figure investment — and the way it is opened and closed each season directly impacts the lifespan of your plaster finish, the reliability of your equipment, and the quality of your water for the entire swim season.
At Luxury Pools By MF, our pool opening and closing service is built around a single principle: gunite pools deserve gunite specialists. We do not service vinyl liner pools. We do not service fiberglass pools. Every protocol, every chemical procedure, and every inspection checklist we use is calibrated specifically for concrete pool construction.
If you own a gunite inground pool in Somerset MA, the sections below will tell you exactly what problems we solve, what you gain when you work with us, and why the difference between a generalist and a specialist could mean thousands of dollars in preventable repairs.
Pain Points for Gunite Pool Owners in Somerset MA
These are the problems we hear from MA homeowners season after season — all of them preventable with the right service provider.
- ✗Green, cloudy water every spring — last year’s closing was not done properly and algae took over under the cover all winter
- ✗Cracked fittings and broken plumbing at opening — result of an incomplete winterization blowout that left water in the lines to freeze
- ✗Etched or permanently stained plaster finish — caused by improper water chemistry at closing, expensive and entirely avoidable
- ✗Can’t get a timely appointment — booked weeks out, you lose valuable weeks of your Somerset MA swim season
- ✗Different technicians every visit — no continuity, no knowledge of your pool’s specific configuration from year to year
- ✗Generic protocols not designed for gunite — companies treating your concrete pool the same as a vinyl liner
- ✗Surprise repair bills at opening — damage a proper closing would have prevented entirely
- ✗No inspection or communication — service completed without flagging issues before they become major problems
Benefits of Our Gunite Pool Opening Service Somerset MA
What you get every season when you work with a gunite pool specialist who builds and services concrete pools exclusively.
- ✓Crystal-clear water from day one — precise chemical balancing means you’re swimming sooner, spending less on chemicals
- ✓Plaster and finish protection — chemistry protocols calibrated for gunite finishes, preserving the life of your surface by years
- ✓Full equipment inspection included — thorough check of pump, filter, heater, shell, and plumbing before swim season
- ✓Zero winter damage at opening — when your pool is closed correctly, spring openings are clean and repair-free
- ✓Consistent team, every season — same technicians open and close your pool with complete knowledge of its history
- ✓Complete winterization peace of mind — every line blown out, every piece of equipment protected before we leave
- ✓Builder-level expertise on every visit — technicians who understand gunite construction from the steel framework up
- ✓Long-term investment protection — proper seasonal care extends the life of your finish, equipment, and shell by years
Talk to an Expert
We understand that sometimes you just want to talk before scheduling a consultation. Our team will gladly answer any of your questions or help you with any of your concerns.
Call Mike or Kristine today!
(508) 504-7665
Our Services
Complete Gunite Pool Opening & Closing Service for Somerset MA Homeowners
Every service we provide is designed exclusively for gunite and concrete inground pools. No vinyl. No fiberglass. Just the expertise your pool deserves.
Spring Service — April through June
Inground Pool Opening Service for Gunite & Concrete Pools
Our inground pool opening service is a precision process built specifically for gunite and concrete pools. Every step protects your plaster finish, verifies your equipment, and delivers swim-ready water — so you lose zero days of your Somerset MA swim season.
- ✓Winter cover removal & storage — carefully removed, cleaned, folded, and stored to extend its lifespan
- ✓Equipment reinstallation — pump, filter, and heater reconnected, primed, and tested before we leave
- ✓Ladders, rails & accessories — all hardware reinstalled, torqued, and verified safe
- ✓Full vacuuming & brushing — shell, walls, steps, and floor cleaned of all off-season debris
- ✓Chemical start-up & balancing — full water test with pH, alkalinity, calcium hardness, and sanitizer corrected
- ✓Gunite shell & equipment inspection — detailed assessment of plaster, coping, fittings, plumbing, and equipment
Fall Service — September through October
Inground Pool Closing & Gunite Pool Closing Service
Our gunite pool closing service eliminates every risk that Somerset MA winters pose to your concrete pool. A single incomplete closing can result in thousands of dollars in spring damage. Our protocol leaves nothing to chance.
- ✓Hardware removal — ladders, rails, and accessories removed, dried, and stored safely
- ✓Complete plumbing blowout — every return, skimmer, and drain line cleared of all standing water
- ✓Equipment winterization — pump, filter, heater, and chlorinator drained and protected
- ✓Winterizing chemical treatment — algaecide, enzyme treatment, and shock precisely dosed
- ✓Water level adjustment — lowered to correct winterization depth for your pool’s configuration
- ✓Winter cover installation — securely fitted and anchored against debris, ice, and a New England winter
Our Specialty
Concrete Pool Opening Service in Somerset MA: We Only Service Gunite Pools
This is not a limitation — it is a deliberate choice that makes us significantly better at what we do. Luxury Pools By MF was built around gunite. We design gunite pools, we build gunite pools, and we provide concrete pool opening service in Somerset MA for gunite pools exclusively.
When you call a general pool service company for your gunite pool opening, you get the same technician who opened a vinyl-lined above-ground pool the day before. The chemistry is different. The inspection protocol is different. The winterization requirements are different.
If you own a gunite inground pool in Somerset MA, you have found the right team. If you own a vinyl liner or fiberglass pool, we respectfully refer you to a generalist — so we can remain completely focused on serving concrete pool owners at the highest possible level.
Pool Types — What We Service
We Service
We Service
Not Serviced
Not Serviced
Gunite Expertise
Why Gunite Pool Winterization Service in MA Demands More Than Generic Pool Service
Somerset MA winters are among the most demanding conditions for inground pool plumbing and equipment in New England. Here is exactly why gunite pool winterization requires a specialist.
Plaster & Aggregate Finish Chemistry
Gunite pool finishes — white plaster, quartz aggregate, pebble surfaces — are chemically reactive in ways vinyl and fiberglass never are. The pH, calcium hardness, and total alkalinity at closing directly determine whether your finish survives winter intact. Our protocols are precision-calibrated for concrete finishes specifically.
Steel-Reinforced Shell Inspection
Beneath every gunite pool’s plaster surface is a structural steel rebar skeleton. Our technicians inspect for signs of movement, cracking, or delamination that could indicate deeper structural stress — issues invisible to the untrained eye that can accelerate rapidly through a Somerset MA winter.
Gunite Pool Winterization — Complete Plumbing Blowout
Gunite pools — especially custom luxury pools — feature more complex plumbing than vinyl or fiberglass alternatives. Multiple return lines, water feature circuits, spa connections, and automation plumbing all require individual attention. Our gunite pool winterization blows out every single line without exception.
New England Freeze-Thaw Protocol
Somerset MA does not simply get cold — it freezes, thaws, and refreezes repeatedly. That cycle stresses pool plumbing more than a steady deep freeze ever would. Our gunite pool service in New England is built around this specific climate reality, winterizing at the timing and sequence that accounts for early October frost events and late-season hard freezes.
Why Choose Us
Our Pool De-Winterization Service & Seasonal Care Is Built on the Same Standard as Our Builds
When you invest in a gunite pool, you invest in decades of summers. Our pool de-winterization service reflects the same commitment to quality that goes into every pool we construct.
Gunite-Only Expertise
Every protocol and technician is trained exclusively for concrete pool construction — delivering depth that general pool companies cannot match.
Builder-Level Inspections
Because we build gunite pools from excavation to finish, we identify early signs of plaster wear, structural movement, and equipment deterioration others miss.
Consistent Teams
No rotating crews. No subcontractors. The same technicians open your pool in May and close it in October — your pool’s history is known every season.
MA Freeze-Thaw Specialists
Over three decades winterizing gunite pools in Somerset MA. Our protocols account for New England’s specific climate — not a generic national standard.
Honest, No-Pressure Service
If something needs attention, we tell you — clearly, without upselling, with the recommendation we would make if it were our own pool.
Statewide Somerset MA Coverage
South Shore, North Shore, Greater Boston, MetroWest, Cape Cod — one consistent standard of specialist-level care across all of Massachusetts.
Somerset MA Pool Calendar
When to Schedule Pool Opening & Pool Closing Service in Somerset MA
Timing your opening and closing correctly in Somerset MA directly affects water quality, chemical costs, and protection against freeze damage.
Ideal early opening window. Cool water inhibits algae growth, reducing startup costs. Best for pools with solid covers.
Opening Window
Peak demand period. Most MA homeowners open now. Book early — our schedule fills 4–6 weeks before Memorial Day.
Peak Demand
Sweet spot for closing. Water drops below 60°F — algae slows and winterizing chemicals work at peak effectiveness.
Closing Window
Final window before hard freeze risk. Close by mid-October to protect against early frost events cracking plumbing.
Close Deadline
Book your spring opening in March or April. Reserve your fall closing by late August. Our calendar fills quickly during peak windows when every Somerset MA pool owner needs service at once.
Frequently Asked Questions
Gunite Pool Opening & Closing Service — Your Questions Answered
Everything Somerset MA gunite pool owners ask us before booking their first service appointment.
What is gunite pool opening service and what does it include in Somerset MA?
When is the best time to schedule gunite pool opening service in Somerset MA?
When should I schedule pool closing service for my gunite pool in Somerset MA?
What is included in your gunite pool closing and winterization service?
Do you only service gunite and concrete inground pools?
Will you open or close a gunite pool that Luxury Pools By MF did not build?
Why does gunite pool winterization require more expertise than other pool types?
How much does gunite pool opening or closing service cost in Somerset MA?
How far in advance should I book pool opening or closing service in Somerset MA?
What areas of Somerset MA do you serve for pool opening and closing service?
Get Started
Ready to Schedule Your Gunite Pool Opening or Closing Service in Somerset MA?
Request a detailed, no-obligation estimate for your Somerset MA gunite pool. We respond quickly with a clear, itemized quote — no surprises, no pressure.
Somerset MAP
Somerset OVERVIEW
|
Somerset, Massachusetts
|
|
|---|---|
|
Town
|
|
Brightman Street Bridge, taken from the Somerset side of the Taunton River
|
|
Seal
|
|
Location in Bristol County in Massachusetts
|
|
| Coordinates:
41°46′10″N 71°07′45″W / 41.76944°N 71.12917°W |
|
| Country | United States |
| State | Massachusetts |
| County | Bristol |
| Settled | 1677 |
| Incorporated | 1790 |
| Government | |
| • Type | Open town meeting |
| Area | |
|
• Total
|
12.0 sq mi (31.0 km) |
| • Land | 8.1 sq mi (21.0 km) |
| • Water | 3.9 sq mi (10.0 km) |
| Elevation | 49 ft (15 m) |
| Population
(2020)
|
|
|
• Total
|
18,303 |
| • Density | 2,260/sq mi (872/km) |
| Time zone | UTC−5 (Eastern) |
| • Summer (DST) | UTC−4 (Eastern) |
| ZIP Codes |
02725, 02726
|
| Area code | 508/774 |
| FIPS code | 25-62430 |
| GNIS feature ID | 0619438 |
| Website | www.townofsomerset.org |
Somerset is a town in Bristol County, Massachusetts, United States. The population was 18,303 at the 2020 census. It is the birthplace and hometown of Clifford Milburn Holland (1883–1924), the chief engineer and namesake of the Holland Tunnel in New York City.
Somerset is a part of the South Coast region of Massachusetts which encompasses the communities that surround Buzzards Bay (excluding the Elizabeth Islands, Bourne and Falmouth), Mount Hope Bay and the Sakonnet River.
ABOUT Somerset, MA
Somerset was first settled in 1677 on the Shawomet lands, and was officially incorporated in 1790. It was named for Somerset Square in Boston, which was, in turn, named for the county of Somerset in England. It was once a vital shipping point, and after the War of 1812 it was one of America’s chief distribution points. In 1872, it became the site of a major coal port, and in the early 20th century a large cannery existed in the town. However, as neighboring Fall River’s industry grew, it absorbed much of Somerset’s, and the town took on more of a suburban character. In fact, the town’s population grew during the Great Depression, as many people from Fall River and other localities moved to the suburb. Today, the town’s major industry (other than suburban services) is power generation, with the Montaup Electric Company plant upriver (founded in 1923) and the Brayton Point Power Station at the town’s southern tip (founded in 1963). Brayton Point has been the target of much criticism for its pollution problems from burning coal. It closed May 31, 2017.
Historically, the town has had a connective relationship with Fall River. Originally, Slade’s Ferry ran across the Taunton River to connect the two towns since the late 18th century. In the late 19th century, the Slade’s Ferry Bridge connected the two towns, from the current southern terminus of Brayton Avenue in Somerset to Brownell Street in Fall River, and was double-decked, with a railroad section on the top level. The bridge was dismantled after closing in 1970 due to its rapid deterioration and its low height. (The path of the old bridge is still somewhat visible; two large sets of power lines cross the river at the same point.) The Brightman Street Bridge just to the north was opened in 1908. A new bridge, named the Veterans Memorial Bridge, was partially completed prior to a dedication ceremony held on September 11, 2011. At first, only the westbound side of the bridge was open to traffic. Since then, both lanes of the bridge have been opened for traffic.
Somerset is located at 41°44′54″N 71°9′11″W / 41.74833°N 71.15306°W (41.748502, −71.153188). According to the United States Census Bureau, the town has a total area of 12.0 square miles (31 km), of which 8.1 square miles (21 km) is land and 3.9 square miles (10 km), or 32.30%, is water. It borders on Mount Hope Bay and Narragansett Bay, and its east border is formed by the Taunton River, an arm of the former bay.
Somerset is bordered by Swansea on the west, Dighton on the north, Fall River on the east (across the Taunton River), and Bristol, Rhode Island, to the south. The border with Bristol is located in the middle of the bay. Cities close to Somerset include Fall River, New Bedford, Attleboro, and Providence, and the town is one hour’s drive south of Boston.
The town is accessed via Interstate 195, which enters the town via the Braga Bridge from Fall River and has an exit at Route 103. It is also connected via the Veterans Memorial Bridge, the fourth bridge to cross the Taunton River between the town and city. The Veterans Memorial Bridge carries U.S. Route 6 and Route 138 across the river. Route 6 heads east–west towards Swansea, with several shopping plazas along the route. Route 138 travels north from the bridge along County Street, the town’s main north–south thoroughfare, towards Dighton. Route 103’s eastern terminus lies at the former intersection of Routes 6 and 138 just south of the new bridge. It heads south-southeast for three-quarters of a mile before turning west-northwest towards Swansea, crossing into that town at a bridge over Lee’s River. Due to the controversy in Fall River over the proposed building of an LNG terminal, town officials have consider keeping the old Brightman Street Bridge open, as the tankers would not fit through it, and the terminal’s proposed site is upriver of the bridges. However, as of the opening of the new bridge, the bridge is closed, as the old roads leading to it on the Fall River side have been removed to make way for the new bridge’s ramp system.
Somerset has bus service along Route 6 provided by the Southeastern Regional Transit Authority (SRTA). The nearest regional bus service is in Fall River, as is MBTA Commuter Rail service at Fall River station. The town’s nearest regional airport is in New Bedford, 18 miles (29 km) away. Until the late 1990s, the nearest airport was in Fall River; however, the airport closed due to various issues. The nearest national airport is T. F. Green Airport in Rhode Island, 27 miles (43 km) away. The nearest international airport is Logan International Airport, 55 miles (89 km) away in Boston.
